Tuckpointing in Algonquin
Mortar joints in Algonquin's brick buildings face roughly 100 freeze-thaw cycles every year. As joints deteriorate, water infiltrates the wall assembly and accelerates damage behind the surface that isn't visible until it becomes expensive. Arrow grinds each joint to a minimum 3/4-inch depth before packing new mortar — a step many contractors skip because it takes longer — and color-matches every job by pulling a physical sample before any joint gets filled. The finished repair should disappear into the existing facade. If you can see where we were, we haven't finished the job.
Tuckpointing ›
Brick Repair in Algonquin
Spalling, cracking, and displaced brick in Algonquin buildings aren't cosmetic issues — they're water entry points. Replacement requires sourcing brick that matches the original in size, color, and texture, which is a real challenge in older building stock where the original manufacturers no longer exist. Arrow locates matching material before committing to the repair so the finished work integrates rather than announces itself. Surrounding mortar is re-tuckpointed to match as part of every brick replacement.
Brick Repair ›
Masonry Restoration in Algonquin
When a Algonquin building needs more than spot repairs, Arrow provides full facade assessments and phased restoration plans. Condo boards and property managers use these plans to prioritize what needs immediate attention versus what can wait — so critical repairs don't get deferred and optional work doesn't get rushed. The assessment covers the full building envelope: mortar, brick, stone, lintels, sills, and coping, with repair priorities assigned by urgency and water risk.
Masonry Restoration ›
Lintel Replacement in Algonquin
Every window and door opening in a masonry building is supported by a lintel that carries the brick load above it. In older Algonquin buildings, original steel lintels have had 50 to 100 years of water exposure and are typically rusting from the inside out long before visible damage appears at the surface. Arrow replaces failed lintels before deterioration reaches the surrounding masonry — because at that point, a lintel replacement becomes a full opening rebuild.
Lintel Replacement ›
Stone Restoration in Algonquin
Algonquin's older commercial and residential buildings frequently incorporate limestone, brownstone, or granite in window surrounds, sills, and facade accents. Stone requires different techniques than brick: specifically matched mortar composition, grinding protocols that preserve the stone face, and consolidants for friable or delaminating material. Arrow handles both the stone repair and the surrounding masonry integration so the restored section reads as a continuous surface.
Stone Restoration ›
Chimney Repair in Algonquin
Chimneys are the most exposed masonry element on any building — unprotected on multiple sides, hit directly by every rain event, and subject to freeze-thaw cycling without the benefit of wall insulation. Arrow handles crown repair and replacement, chimney cap installation, tuckpointing, flashing repair, and full chimney rebuilds for Algonquin commercial and multi-family properties. Scope is based on what the chimney actually needs, not a standardized package.
Chimney Repair ›
Panel Brick Repair in Algonquin
Mid-century apartment buildings across Algonquin and the surrounding suburbs frequently use panel brick construction — thin brick units applied to a concrete or steel frame rather than load-bearing masonry. Joint systems in panel brick differ from traditional mortar and require specific repair techniques to maintain a weathertight seal between the panel and the frame. Standard tuckpointing approaches fail quickly on this construction type. Arrow's crews work on panel brick specifically, which matters when the building's envelope depends on the joint repair being done correctly.
Panel Brick Repair ›
